generates triggers after each set amount of steps. Two stepsizes at the same time.
Euclidian toggling gate generator
Feed it a counter and it will toggle the gate everytime one of the denominators wraps the count
knob with an inbuild (randomisable) automator and pattern selector for live use. Doesn't save it's patterns! Pattern size and amount of patterns can be set using the attributes.
you can randomise just the selected pattern or all patterns at the same time.
Use the max/min knobs to set your desired output scaling
only lets the count through for a part of the whole range.
The last count position can be kept when "sustain" is high, otherwise it goes back to 0 when it reaches the maximum length.
-maximum count range (wraps when reached)
-play length (the length of the count that is passed)
-offset offsets the part that is let through, so it only passes after a certain step.
simplified versions of the deskMix2 and 3 modules and their accompanying deskCtrl2 module
only feature volume, mute and solo controls for each channel
4 vca's in one to save up some space
added a second pair of divide and multiply controls for controlling the rate of the lfo.
the first pair controls the length of the envelope relative to the whole cycle
simplified version of the tablemorph oscillator with only a single morph control, useful for if you need a table oscillator with a bit less power then the tablemorph. Though, next to table morphing, it also is able to morph through ratio's of it's root-pitch with both frequency multiplier as well as divider.
DON'T FORGET TO ADD AN ENVELOPE/VOLUME CONTROL AT THE "ENV" INPUT!!!
wavetable oscillator that can linearyly morph through the table in a set amount of steps and stepsize.
loads wavetables created with the "TheCreator" module.
Has external frequency modulation, phase modulation and sync.
-hrm and div allow to set the oscillator to a ratio to the root-pitch
-extFM controls the external FM width
-waveform offsets the startposition of the table readout
-LP dampens the high frequencies/smooths waveform
-mix controls the morph through the wavetable AND harmonic ratio offsets
-step sets the stepsize with which you morph through the table
-quant sets the amount of waveforms you go through with the mix-control
-Mstep controls the stepsize of the harmonic multiplier
-Mrng sets the maximum harmonic multiplier that can be reached
-Dstep sets the stepsize of the harmonic division
-Drng sets the maximum harmonic division that can be reached
the other way around.. the expanded version of the tablemorph. Has some extra controls for more morphing and funky business
randomised A-B switch for gate signals
dirty rotten delayline with delaytime, feedback, samplerate, bits, LP damp, wet and dry control