An object to modulate another object. This object was created to be able to more easily use several of the modulation sources available on the Roli Seaboard.
Turning the Value knob will send the value to the output. The same applies to the In connector. The last one, knob or input, changed will have priority.
The value on the ModIn connector will be added on top of the value set by the Value knob/In connector.
The headroom is the amount between the current calculated value and the maximum value.
The value on the ModHeadroom inlet adds part of the headroom on top of the calculated value.
The Master knob will attenuate the level of modulation on the output.
example of intended use
You can connect the modulator to the frequency input control of a filter. By turning the Value knob you can control the frequency directly. You can connect the velocity output of your keyboard to the In connector opening the filter based on how hard the keyboard is played.
You then can connect a mod wheel, LFO or ADSR to the ModIn connector which will modulate the frequency of the filter.
Finaly you can connect your aftertouch (or Glide on the Seaboard) to the ModHeadroom and based on the amount of pressure the filter will open further.